Camelway produce self-loading machine is can automatically load, mixing and unload equipment.
Self-loading machine advantages:
1.Stir evenly, the blades are fan-shaped, and the contact area with the medium is large when stirring.
2.The nozzles are arranged in multiple rows, and the water volume is uniform and adjustable.
3.The mixing drum of the automatic feeding mixing truck has a compact structure and good sealing performance, and a ash baffle is set at the feed inlet to avoid water mist backlash.
4.Low ash remaining rate. The watershed at the bottom of the box is set to ensure that there are no dead spots in the equipment.
5.Advanced equipment performance of mining mixing drum and stable quality of finished products.
6.The feeding hopper is installed obliquely to ensure smooth feeding.
7.The self-loading mixer truck is easy to operate, simple and easy to learn. The forward rotation is for feeding and concrete mixing; the reverse rotation, driven by the spiral blade, the concrete is discharged from the discharge port.
Self-loading machine precautions:
Before using the automatic feeding mixer, you should first understand the precautions for use.
1. The pressure of the hydraulic system should meet the requirements in the manual and should not be adjusted at will. The quality and quantity of hydraulic oil should meet the original requirements.
2. Before loading the concrete mixer truck, the residual water and debris remaining in the mixing drum should be discharged first. Continuously rotate during transportation to prevent concrete from separating. Before the concrete mixer truck arrives at the construction site and is discharged, the mixer should rotate at a full speed of 14-18 revolutions for 1-2 minutes, and then discharge in the reverse direction. Before reversing, stop the mixing drum and do not rotate.
3. The ambient temperature is higher than +25 degrees Celsius. The duration of loading, transportation and unloading should not exceed 60 minutes, and the ambient temperature should be below +25 degrees Celsius. The above time shall not exceed 90 minutes.
4. When working, do not put your hands into the rotating mixing barrel. It is strictly forbidden to enter the main unloading trough and the joints of the extended unloading trough to avoid accidents.
5. After daily work, the driver is responsible for injecting clean water into the mixing drum and rotating it at high speed (14-18 rpm) for 5-10 minutes, and then draining water to ensure that the tank is clean. When cleaning the various parts of the mixing drum with high-pressure water, care should be taken to avoid the use of instruments and joysticks. The distance between the pressure water nozzle and the body paint surface should not be less than 40 cm.
If you want to know the model price and technical parameters of the concrete batching plant, please don't hesitate to contact me.